Ir para conteúdo
  • Cadastre-se

Normal Site não fica online [HELP]


Posts Recomendados

pessoal estou precisando de ajuda para colocar o site do meu otserv online para os outros players poder acessa-lo.

já fiz os seguintes procedimentos:

configurei as portas em C:\xampp\apache\conf\httpd

e também em C:\xampp\apache\conf\extrahttpd-ssl

liberei portas no firewall, não uso roteador, liberei as portas no modem também

e mesmo assim meu site só pode ser acessado por http://localhost:8090/

quando tento acessa-lo pelo meu ip exemplo http://152.238.227.2:8090/

aparece o seguinte

post-102-0-01404100-1437270252_thumb.png

 

estou usando o gesior desse tópico http://www.tibiaking.com/forum/topic/36403-global-full-1078-tfs-10-lions-rock-cast-system-atualiza%C3%A7%C3%A3o-v12/

 

que inclusive funcionou perfeitamente com o meu otserv só estou com esse problema

Link para o post
Compartilhar em outros sites

Eu também estava com o mesmo erro, atualizei o Xampp para a versão mais recente e deu tudo certo, só que agora meus amigos não conseguem entrar no site, ficam tomando timeout. qual versão do xampp tá usando?

Link para o post
Compartilhar em outros sites
 

Eu também estava com o mesmo erro, atualizei o Xampp para a versão mais recente e deu tudo certo, só que agora meus amigos não conseguem entrar no site, ficam tomando timeout. qual versão do xampp tá usando?

 

 

3.2.1

Editado por StronGer (veja o histórico de edições)
Link para o post
Compartilhar em outros sites

libere as portas do firewall entrada e saida 80,7171 e 7172 [coloque liberar conexão], se nao conseguir tente desativar o firewall para testar , comigo funcinou

Link para o post
Compartilhar em outros sites

tem certeza que liberou as portas? cmg tinha dado a msm coisa dps vi que liberei as portas da maneira errada no meu molden e quando acertei isso funcionou

 

qual a maneira correta?

Link para o post
Compartilhar em outros sites

Amigo. É natural que pelo seu PC você não consiga acesso pelo ip:8090, apenas outros computadores podem se conectar por este endereço.

 

É importante lembrar que seu IP muda ao reiniciar o Modem ou as vezes ao reiniciar o PC. Por isso é importante criar um ip fixo (global) pelo "no-ip" e ainda usar o aplicativo DUC para atualizar automaticamente seu global ip. Com isso o endereço do seu site será sempre exemplo.servegame.com / exemplo.no-ip.info / etc.

Ajudei? Clica em Gostei!

 

Da um like ae!

https://www.facebook.com/nosegangserver

 

 

 

Link para o post
Compartilhar em outros sites

reinicie seu xampp depois de trocar as portas ai tente entrar em seu site, se não funcionar poste seu httpd.conf que esta em \xampp\apache\conf e tambem seu httpd-ssl.conf que esta em xampp\apache\conf\extra

Link para o post
Compartilhar em outros sites

httpd.conf

#

# This is the main Apache HTTP server configuration file. It contains the

# configuration directives that give the server its instructions.

# See <URL:http://httpd.apache.org/docs/2.4/>for detailed information.

# In particular, see

# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>

# for a discussion of each configuration directive.

#

# Do NOT simply read the instructions in here without understanding

# what they do. They're here only as hints or reminders. If you are unsure

# consult the online docs. You have been warned.

#

# Configuration and logfile names: If the filenames you specify for many

# of the server's control files begin with "/" (or "drive:/" for Win32), the

# server will use that explicit path. If the filenames do *not* begin

# with "/", the value of ServerRoot is prepended -- so "logs/access_log"

# with ServerRoot set to "/usr/local/apache2" will be interpreted by the

# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"

# will be interpreted as '/logs/access_log'.

#

# NOTE: Where filenames are specified, you must use forward slashes

# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").

# If a drive letter is omitted, the drive on which httpd.exe is located

# will be used by default. It is recommended that you always supply

# an explicit drive letter in absolute paths to avoid confusion.

#

# ServerRoot: The top of the directory tree under which the server's

# configuration, error, and log files are kept.

#

# Do not add a slash at the end of the directory path. If you point

# ServerRoot at a non-local disk, be sure to specify a local disk on the

# Mutex directive, if file-based mutexes are used. If you wish to share the

# same ServerRoot for multiple httpd daemons, you will need to change at

# least PidFile.

#

ServerRoot "C:/xampp/apache"

#

# Mutex: Allows you to set the mutex mechanism and mutex file directory

# for individual mutexes, or change the global defaults

#

# Uncomment and change the directory if mutexes are file-based and the default

# mutex file directory is not on a local disk or is not appropriate for some

# other reason.

#

# Mutex default:logs

#

# Listen: Allows you to bind Apache to specific IP addresses and/or

# ports, instead of the default. See also the <VirtualHost>

# directive.

#

# Change this to Listen on specific IP addresses as shown below to

# prevent Apache from glomming onto all bound IP addresses.

#

#Listen 12.34.56.78:8090

Listen 8090

#

# Dynamic Shared Object (DSO) Support

#

# To be able to use the functionality of a module which was built as a DSO you

# have to place corresponding `LoadModule' lines at this location so the

# directives contained in it are actually available _before_ they are used.

# Statically compiled modules (those listed by `httpd -l') do not need

# to be loaded here.

#

# Example:

# LoadModule foo_module modules/mod_foo.so

#

LoadModule access_compat_module modules/mod_access_compat.so

LoadModule actions_module modules/mod_actions.so

LoadModule alias_module modules/mod_alias.so

LoadModule allowmethods_module modules/mod_allowmethods.so

LoadModule asis_module modules/mod_asis.so

LoadModule auth_basic_module modules/mod_auth_basic.so

#LoadModule auth_digest_module modules/mod_auth_digest.so

#LoadModule auth_form_module modules/mod_auth_form.so

#LoadModule authn_anon_module modules/mod_authn_anon.so

LoadModule authn_core_module modules/mod_authn_core.so

#LoadModule authn_dbd_module modules/mod_authn_dbd.so

#LoadModule authn_dbm_module modules/mod_authn_dbm.so

LoadModule authn_file_module modules/mod_authn_file.so

#LoadModule authn_socache_module modules/mod_authn_socache.so

#LoadModule authnz_fcgi_module modules/mod_authnz_fcgi.so

#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so

LoadModule authz_core_module modules/mod_authz_core.so

#LoadModule authz_dbd_module modules/mod_authz_dbd.so

#LoadModule authz_dbm_module modules/mod_authz_dbm.so

LoadModule authz_groupfile_module modules/mod_authz_groupfile.so

LoadModule authz_host_module modules/mod_authz_host.so

#LoadModule authz_owner_module modules/mod_authz_owner.so

LoadModule authz_user_module modules/mod_authz_user.so

LoadModule autoindex_module modules/mod_autoindex.so

#LoadModule buffer_module modules/mod_buffer.so

#LoadModule cache_module modules/mod_cache.so

#LoadModule cache_disk_module modules/mod_cache_disk.so

#LoadModule cache_socache_module modules/mod_cache_socache.so

#LoadModule cern_meta_module modules/mod_cern_meta.so

LoadModule cgi_module modules/mod_cgi.so

#LoadModule charset_lite_module modules/mod_charset_lite.so

#LoadModule data_module modules/mod_data.so

#LoadModule dav_module modules/mod_dav.so

#LoadModule dav_fs_module modules/mod_dav_fs.so

LoadModule dav_lock_module modules/mod_dav_lock.so

#LoadModule dbd_module modules/mod_dbd.so

#LoadModule deflate_module modules/mod_deflate.so

LoadModule dir_module modules/mod_dir.so

#LoadModule dumpio_module modules/mod_dumpio.so

LoadModule env_module modules/mod_env.so

#LoadModule expires_module modules/mod_expires.so

#LoadModule ext_filter_module modules/mod_ext_filter.so

#LoadModule file_cache_module modules/mod_file_cache.so

#LoadModule filter_module modules/mod_filter.so

LoadModule headers_module modules/mod_headers.so

#LoadModule heartbeat_module modules/mod_heartbeat.so

#LoadModule heartmonitor_module modules/mod_heartmonitor.so

#LoadModule ident_module modules/mod_ident.so

#LoadModule imagemap_module modules/mod_imagemap.so

LoadModule include_module modules/mod_include.so

LoadModule info_module modules/mod_info.so

LoadModule isapi_module modules/mod_isapi.so

#LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so

#LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so

#LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so

#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so

#LoadModule ldap_module modules/mod_ldap.so

#LoadModule logio_module modules/mod_logio.so

LoadModule log_config_module modules/mod_log_config.so

#LoadModule log_debug_module modules/mod_log_debug.so

#LoadModule log_forensic_module modules/mod_log_forensic.so

#LoadModule lua_module modules/mod_lua.so

LoadModule cache_disk_module modules/mod_cache_disk.so

#LoadModule macro_module modules/mod_macro.so

LoadModule mime_module modules/mod_mime.so

#LoadModule mime_magic_module modules/mod_mime_magic.so

LoadModule negotiation_module modules/mod_negotiation.so

LoadModule proxy_module modules/mod_proxy.so

LoadModule proxy_ajp_module modules/mod_proxy_ajp.so

#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so

#LoadModule proxy_connect_module modules/mod_proxy_connect.so

#LoadModule proxy_express_module modules/mod_proxy_express.so

#LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so

#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so

#LoadModule proxy_html_module modules/mod_proxy_html.so

#LoadModule proxy_http_module modules/mod_proxy_http.so

#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so

#LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so

#LoadModule ratelimit_module modules/mod_ratelimit.so

#LoadModule reflector_module modules/mod_reflector.so

#LoadModule remoteip_module modules/mod_remoteip.so

#LoadModule request_module modules/mod_request.so

#LoadModule reqtimeout_module modules/mod_reqtimeout.so

LoadModule rewrite_module modules/mod_rewrite.so

#LoadModule sed_module modules/mod_sed.so

#LoadModule session_module modules/mod_session.so

#LoadModule session_cookie_module modules/mod_session_cookie.so

#LoadModule session_crypto_module modules/mod_session_crypto.so

#LoadModule session_dbd_module modules/mod_session_dbd.so

LoadModule setenvif_module modules/mod_setenvif.so

#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so

#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so

#LoadModule socache_dbm_module modules/mod_socache_dbm.so

#LoadModule socache_memcache_module modules/mod_socache_memcache.so

LoadModule socache_shmcb_module modules/mod_socache_shmcb.so

#LoadModule speling_module modules/mod_speling.so

LoadModule ssl_module modules/mod_ssl.so

LoadModule status_module modules/mod_status.so

#LoadModule substitute_module modules/mod_substitute.so

#LoadModule unique_id_module modules/mod_unique_id.so

#LoadModule userdir_module modules/mod_userdir.so

#LoadModule usertrack_module modules/mod_usertrack.so

LoadModule version_module modules/mod_version.so

#LoadModule vhost_alias_module modules/mod_vhost_alias.so

#LoadModule watchdog_module modules/mod_watchdog.so

#LoadModule xml2enc_module modules/mod_xml2enc.so

<IfModule unixd_module>

#

# If you wish httpd to run as a different user or group, you must run

# httpd as root initially and it will switch.

#

# User/Group: The name (or #number) of the user/group to run httpd as.

# It is usually good practice to create a dedicated user and group for

# running httpd, as with most system services.

#

User daemon

Group daemon

</IfModule>

# 'Main' server configuration

#

# The directives in this section set up the values used by the 'main'

# server, which responds to any requests that aren't handled by a

# <VirtualHost> definition. These values also provide defaults for

# any <VirtualHost> containers you may define later in the file.

#

# All of these directives may appear inside <VirtualHost> containers,

# in which case these default settings will be overridden for the

# virtual host being defined.

#

#

# ServerAdmin: Your address, where problems with the server should be

# e-mailed. This address appears on some server-generated pages, such

# as error documents. e.g. [email protected]

#

ServerAdmin postmaster@localhost

#

# ServerName gives the name and port that the server uses to identify itself.

# This can often be determined automatically, but we recommend you specify

# it explicitly to prevent problems during startup.

#

# If your host doesn't have a registered DNS name, enter its IP address here.

#

ServerName localhost:8009

#

# Deny access to the entirety of your server's filesystem. You must

# explicitly permit access to web content directories in other

# <Directory> blocks below.

#

<Directory />

AllowOverride none

Require all denied

</Directory>

#

# Note that from this point forward you must specifically allow

# particular features to be enabled - so if something's not working as

# you might expect, make sure that you have specifically enabled it

# below.

#

#

# DocumentRoot: The directory out of which you will serve your

# documents. By default, all requests are taken from this directory, but

# symbolic links and aliases may be used to point to other locations.

#

DocumentRoot "C:/xampp/htdocs"

<Directory "C:/xampp/htdocs">

#

# Possible values for the Options directive are "None", "All",

# or any combination of:

# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews

#

# Note that "MultiViews" must be named *explicitly* --- "Options All"

# doesn't give it to you.

#

# The Options directive is both complicated and important. Please see

# http://httpd.apache.org/docs/2.4/mod/core.html#options

# for more information.

#

Options Indexes FollowSymLinks Includes ExecCGI

#

# AllowOverride controls what directives may be placed in .htaccess files.

# It can be "All", "None", or any combination of the keywords:

# AllowOverride FileInfo AuthConfig Limit

#

AllowOverride All

#

# Controls who can get stuff from this server.

#

Require all granted

</Directory>

#

# DirectoryIndex: sets the file that Apache will serve if a directory

# is requested.

#

<IfModule dir_module>

DirectoryIndex index.php index.pl index.cgi index.asp index.shtml index.html index.htm \

default.php default.pl default.cgi default.asp default.shtml default.html default.htm \

home.php home.pl home.cgi home.asp home.shtml home.html home.htm

</IfModule>

#

# The following lines prevent .htaccess and .htpasswd files from being

# viewed by Web clients.

#

<Files ".ht*">

Require all denied

</Files>

#

# ErrorLog: The location of the error log file.

# If you do not specify an ErrorLog directive within a <VirtualHost>

# container, error messages relating to that virtual host will be

# logged here. If you *do* define an error logfile for a <VirtualHost>

# container, that host's errors will be logged there and not here.

#

ErrorLog "logs/error.log"

#

# LogLevel: Control the number of messages logged to the error_log.

# Possible values include: debug, info, notice, warn, error, crit,

# alert, emerg.

#

LogLevel warn

<IfModule log_config_module>

#

# The following directives define some format nicknames for use with

# a CustomLog directive (see below).

#

LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined

LogFormat "%h %l %u %t \"%r\" %>s %b" common

<IfModule logio_module>

# You need to enable mod_logio.c to use %I and %O

LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio

</IfModule>

#

# The location and format of the access logfile (Common Logfile Format).

# If you do not define any access logfiles within a <VirtualHost>

# container, they will be logged here. Contrariwise, if you *do*

# define per-<VirtualHost> access logfiles, transactions will be

# logged therein and *not* in this file.

#

#CustomLog "logs/access.log" common

#

# If you prefer a logfile with access, agent, and referer information

# (Combined Logfile Format) you can use the following directive.

#

CustomLog "logs/access.log" combined

</IfModule>

<IfModule alias_module>

#

# Redirect: Allows you to tell clients about documents that used to

# exist in your server's namespace, but do not anymore. The client

# will make a new request for the document at its new location.

# Example:

# Redirect permanent /foo http://www.example.com/bar

#

# Alias: Maps web paths into filesystem paths and is used to

# access content that does not live under the DocumentRoot.

# Example:

# Alias /webpath /full/filesystem/path

#

# If you include a trailing / on /webpath then the server will

# require it to be present in the URL. You will also likely

# need to provide a <Directory> section to allow access to

# the filesystem path.

#

# ScriptAlias: This controls which directories contain server scripts.

# ScriptAliases are essentially the same as Aliases, except that

# documents in the target directory are treated as applications and

# run by the server when requested rather than as documents sent to the

# client. The same rules about trailing "/" apply to ScriptAlias

# directives as to Alias.

#

ScriptAlias /cgi-bin/ "C:/xampp/cgi-bin/"

</IfModule>

<IfModule cgid_module>

#

# ScriptSock: On threaded servers, designate the path to the UNIX

# socket used to communicate with the CGI daemon of mod_cgid.

#

#Scriptsock cgisock

</IfModule>

#

# "C:/xampp/cgi-bin" should be changed to whatever your ScriptAliased

# CGI directory exists, if you have that configured.

#

<Directory "C:/xampp/cgi-bin">

AllowOverride All

Options None

Require all granted

</Directory>

<IfModule mime_module>

#

# TypesConfig points to the file containing the list of mappings from

# filename extension to MIME-type.

#

TypesConfig conf/mime.types

#

# AddType allows you to add to or override the MIME configuration

# file specified in TypesConfig for specific file types.

#

#AddType application/x-gzip .tgz

#

# AddEncoding allows you to have certain browsers uncompress

# information on the fly. Note: Not all browsers support this.

#

#AddEncoding x-compress .Z

#AddEncoding x-gzip .gz .tgz

#

# If the AddEncoding directives above are commented-out, then you

# probably should define those extensions to indicate media types:

#

AddType application/x-compress .Z

AddType application/x-gzip .gz .tgz

#

# AddHandler allows you to map certain file extensions to "handlers":

# actions unrelated to filetype. These can be either built into the server

# or added with the Action directive (see below)

#

# To use CGI scripts outside of ScriptAliased directories:

# (You will also need to add "ExecCGI" to the "Options" directive.)

#

AddHandler cgi-script .cgi .pl .asp

# For type maps (negotiated resources):

#AddHandler type-map var

#

# Filters allow you to process content before it is sent to the client.

#

# To parse .shtml files for server-side includes (SSI):

# (You will also need to add "Includes" to the "Options" directive.)

#

AddType text/html .shtml

AddOutputFilter INCLUDES .shtml

</IfModule>

#

# The mod_mime_magic module allows the server to use various hints from the

# contents of the file itself to determine its type. The MIMEMagicFile

# directive tells the module where the hint definitions are located.

#

<IfModule mime_magic_module>

#

# The mod_mime_magic module allows the server to use various hints from the

# contents of the file itself to determine its type. The MIMEMagicFile

# directive tells the module where the hint definitions are located.

#

MIMEMagicFile "conf/magic"

</IfModule>

#

# Customizable error responses come in three flavors:

# 1) plain text 2) local redirects 3) external redirects

#

# Some examples:

#ErrorDocument 500 "The server made a boo boo."

#ErrorDocument 404 /missing.html

#ErrorDocument 404 "/cgi-bin/missing_handler.pl"

#ErrorDocument 402 http://www.example.com/subscription_info.html

#

#

# MaxRanges: Maximum number of Ranges in a request before

# returning the entire resource, or one of the special

# values 'default', 'none' or 'unlimited'.

# Default setting is to accept 200 Ranges.

#MaxRanges unlimited

#

# EnableMMAP and EnableSendfile: On systems that support it,

# memory-mapping or the sendfile syscall may be used to deliver

# files. This usually improves server performance, but must

# be turned off when serving from networked-mounted

# filesystems or if support for these functions is otherwise

# broken on your system.

# Defaults: EnableMMAP On, EnableSendfile Off

#

#EnableMMAP off

#EnableSendfile off

# Supplemental configuration

#

# The configuration files in the conf/extra/ directory can be

# included to add extra features or to modify the default configuration of

# the server, or you may simply copy their contents here and change as

# necessary.

# Server-pool management (MPM specific)

Include conf/extra/httpd-mpm.conf

# Multi-language error messages

Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings

Include conf/extra/httpd-autoindex.conf

# Language settings

Include conf/extra/httpd-languages.conf

# User home directories

Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration

Include conf/extra/httpd-info.conf

# Virtual hosts

Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual

#Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)

#Attention! WEB_DAV is a security risk without a new userspecific configuration for a secure authentifcation

#Include conf/extra/httpd-dav.conf

# Various default settings

#Include conf/extra/httpd-default.conf

# Implements a proxy/gateway for Apache.

Include "conf/extra/httpd-proxy.conf"

# Various default settings

Include "conf/extra/httpd-default.conf"

# XAMPP settings

Include "conf/extra/httpd-xampp.conf"

# Configure mod_proxy_html to understand HTML4/XHTML1

<IfModule proxy_html_module>

Include conf/extra/proxy-html.conf

</IfModule>

# Secure (SSL/TLS) connections

Include conf/extra/httpd-ssl.conf

#

# Note: The following must must be present to support

# starting without SSL on platforms with no /dev/random equivalent

# but a statically compiled-in mod_ssl.

#

<IfModule ssl_module>

SSLRandomSeed startup builtin

SSLRandomSeed connect builtin

</IfModule>

#

# uncomment out the below to deal with user agents that deliberately

# violate open standards by misusing DNT (DNT *must* be a specific

# end-user choice)

#

#<IfModule setenvif_module>

#BrowserMatch "MSIE 10.0;" bad_DNT

#</IfModule>

#<IfModule headers_module>

#RequestHeader unset DNT env=bad_DNT

#</IfModule>

# XAMPP: We disable operating system specific optimizations for a listening

# socket by the http protocol here. IE 64 bit make problems without this.

AcceptFilter http none

# AJP13 Proxy

<IfModule mod_proxy.c>

<IfModule mod_proxy_ajp.c>

Include "conf/extra/httpd-ajp.conf"

</IfModule>

</IfModule>

httpd-ssl.conf

#

# This is the Apache server configuration file providing SSL support.

# It contains the configuration directives to instruct the server how to

# serve pages over an https connection. For detailed information about these

# directives see <URL:http://httpd.apache.org/docs/2.4/mod/mod_ssl.html>

#

# Do NOT simply read the instructions in here without understanding

# what they do. They're here only as hints or reminders. If you are unsure

# consult the online docs. You have been warned.

#

# Required modules: mod_log_config, mod_setenvif, mod_ssl,

# socache_shmcb_module (for default value of SSLSessionCache)

#

# Pseudo Random Number Generator (PRNG):

# Configure one or more sources to seed the PRNG of the SSL library.

# The seed data should be of good random quality.

# WARNING! On some platforms /dev/random blocks if not enough entropy

# is available. This means you then cannot use the /dev/random device

# because it would lead to very long connection times (as long as

# it requires to make more entropy available). But usually those

# platforms additionally provide a /dev/urandom device which doesn't

# block. So, if available, use this one instead. Read the mod_ssl User

# Manual for more details.

#

#SSLRandomSeed startup file:/dev/random 512

#SSLRandomSeed startup file:/dev/urandom 512

#SSLRandomSeed connect file:/dev/random 512

#SSLRandomSeed connect file:/dev/urandom 512

#

# When we also provide SSL we have to listen to the

# standard HTTP port (see above) and to the HTTPS port

#

Listen 4499

##

## SSL Global Context

##

## All SSL configuration in this context applies both to

## the main server and all SSL-enabled virtual hosts.

##

# SSL Cipher Suite:

# List the ciphers that the client is permitted to negotiate.

# See the mod_ssl documentation for a complete list.

SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5

# Speed-optimized SSL Cipher configuration:

# If speed is your main concern (on busy HTTPS servers e.g.),

# you might want to force clients to specific, performance

# optimized ciphers. In this case, prepend those ciphers

# to the SSLCipherSuite list, and enable SSLHonorCipherOrder.

# Caveat: by giving precedence to RC4-SHA and AES128-SHA

# (as in the example below), most connections will no longer

# have perfect forward secrecy - if the server's key is

# compromised, captures of past or future traffic must be

# considered compromised, too.

#SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5

#SSLHonorCipherOrder on

# Pass Phrase Dialog:

# Configure the pass phrase gathering process.

# The filtering dialog program (`builtin' is an internal

# terminal dialog) has to provide the pass phrase on stdout.

SSLPassPhraseDialog builtin

# Inter-Process Session Cache:

# Configure the SSL Session Cache: First the mechanism

# to use and second the expiring timeout (in seconds).

#SSLSessionCache "shmcb:C:/xampp/apache/logs/ssl_scache(512000)"

SSLSessionCache "shmcb:C:/xampp/apache/logs/ssl_scache(512000)"

SSLSessionCacheTimeout 300

# OCSP Stapling (requires OpenSSL 0.9.8h or later)

#

# This feature is disabled by default and requires at least

# the two directives SSLUseStapling and SSLStaplingCache.

# Refer to the documentation on OCSP Stapling in the SSL/TLS

# How-To for more information.

#

# Enable stapling for all SSL-enabled servers:

#SSLUseStapling On

# Define a relatively small cache for OCSP Stapling using

# the same mechanism that is used for the SSL session cache

# above. If stapling is used with more than a few certificates,

# the size may need to be increased. (AH01929 will be logged.)

#SSLStaplingCache "shmcb:c:/Apache24/logs/ssl_stapling(32768)"

# Seconds before valid OCSP responses are expired from the cache

#SSLStaplingStandardCacheTimeout 3600

# Seconds before invalid OCSP responses are expired from the cache

#SSLStaplingErrorCacheTimeout 600

##

## SSL Virtual Host Context

##

<VirtualHost _default_:4499>

# General setup for the virtual host

DocumentRoot "C:/xampp/htdocs"

ServerName www.example.com:4499

ServerAdmin [email protected]

ErrorLog "C:/xampp/apache/logs/error.log"

TransferLog "C:/xampp/apache/logs/access.log"

# SSL Engine Switch:

# Enable/Disable SSL for this virtual host.

SSLEngine on

# Server Certificate:

# Point SSLCertificateFile "conf/ssl.crt/server.crt"

# the certificate is encrypted, then you will be prompted for a

# pass phrase. Note that a kill -HUP will prompt again. Keep

# in mind that if you have both an RSA and a DSA certificate you

# can configure both in parallel (to also allow the use of DSA

# ciphers, etc.)

# Some ECC cipher suites (http://www.ietf.org/rfc/rfc4492.txt)

# require an ECC certificate which can also be configured in

# parallel.

SSLCertificateFile "conf/ssl.crt/server.crt"

#SSLCertificateFile "conf/ssl.crt/server.crt"

#SSLCertificateFile "conf/ssl.crt/server.crt"

# Server Private Key:

# If the key is not combined with the certificate, use this

# directive to point at the key file. Keep in mind that if

# you've both a RSA and a DSA private key you can configure

# both in parallel (to also allow the use of DSA ciphers, etc.)

# ECC keys, when in use, can also be configured in parallel

SSLCertificateKeyFile "conf/ssl.key/server.key"

#SSLCertificateKeyFile "conf/ssl.key/server.key"

#SSLCertificateKeyFile "conf/ssl.key/server.key"

# Server Certificate Chain:

# Point SSLCertificateChainFile at a file containing the

# concatenation of PEM encoded CA certificates which form the

# certificate chain for the server certificate. Alternatively

# the referenced file can be the same as SSLCertificateFile "conf/ssl.crt/server.crt"

# certificate for convenience.

#SSLCertificateChainFile "c:/Apache24/conf/server-ca.crt"

# Certificate Authority (CA):

# Set the CA certificate verification path where to find CA

# certificates for client authentication or alternatively one

# huge file containing all of them (file must be PEM encoded)

# Note: Inside SSLCACertificatePath you need hash symlinks

# to point to the certificate files. Use the provided

# Makefile to update the hash symlinks after changes.

#SSLCACertificatePath "c:/Apache24/conf/ssl.crt"

#SSLCACertificateFile "c:/Apache24/conf/ssl.crt/ca-bundle.crt"

# Certificate Revocation Lists (CRL):

# Set the CA revocation path where to find CA CRLs for client

# authentication or alternatively one huge file containing all

# of them (file must be PEM encoded).

# The CRL checking mode needs to be configured explicitly

# through SSLCARevocationCheck (defaults to "none" otherwise).

# Note: Inside SSLCARevocationPath you need hash symlinks

# to point to the certificate files. Use the provided

# Makefile to update the hash symlinks after changes.

#SSLCARevocationPath "c:/Apache24/conf/ssl.crl"

#SSLCARevocationFile "c:/Apache24/conf/ssl.crl/ca-bundle.crl"

#SSLCARevocationCheck chain

# Client Authentication (Type):

# Client certificate verification type and depth. Types are

# none, optional, require and optional_no_ca. Depth is a

# number which specifies how deeply to verify the certificate

# issuer chain before deciding the certificate is not valid.

#SSLVerifyClient require

#SSLVerifyDepth 10

# TLS-SRP mutual authentication:

# Enable TLS-SRP and set the path to the OpenSSL SRP verifier

# file (containing login information for SRP user accounts).

# Requires OpenSSL 1.0.1 or newer. See the mod_ssl FAQ for

# detailed instructions on creating this file. Example:

# "openssl srp -srpvfile c:/Apache24/conf/passwd.srpv -add username"

#SSLSRPVerifierFile "c:/Apache24/conf/passwd.srpv"

# Access Control:

# With SSLRequire you can do per-directory access control based

# on arbitrary complex boolean expressions containing server

# variable checks and other lookup directives. The syntax is a

# mixture between C and Perl. See the mod_ssl documentation

# for more details.

#<Location />

#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \

# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \

# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \

# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \

# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \

# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/

#</Location>

# SSL Engine Options:

# Set various options for the SSL engine.

# o FakeBasicAuth:

# Translate the client X.509 into a Basic Authorisation. This means that

# the standard Auth/DBMAuth methods can be used for access control. The

# user name is the `one line' version of the client's X.509 certificate.

# Note that no password is obtained from the user. Every entry in the user

# file needs this password: `xxj31ZMTZzkVA'.

# o ExportCertData:

# This exports two additional environment variables: SSL_CLIENT_CERT and

# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the

# server (always existing) and the client (only existing when client

# authentication is used). This can be used to import the certificates

# into CGI scripts.

# o StdEnvVars:

# This exports the standard SSL/TLS related `SSL_*' environment variables.

# Per default this exportation is switched off for performance reasons,

# because the extraction step is an expensive operation and is usually

# useless for serving static content. So one usually enables the

# exportation for CGI and SSI requests only.

# o StrictRequire:

# This denies access when "SSLRequireSSL" or "SSLRequire" applied even

# under a "Satisfy any" situation, i.e. when it applies access is denied

# and no other module can change it.

# o OptRenegotiate:

# This enables optimized SSL connection renegotiation handling when SSL

# directives are used in per-directory context.

#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire

<FilesMatch "\.(cgi|shtml|phtml|php)$">

SSLOptions +StdEnvVars

</FilesMatch>

<Directory "C:/xampp/apache/cgi-bin">

SSLOptions +StdEnvVars

</Directory>

# SSL Protocol Adjustments:

# The safe and default but still SSL/TLS standard compliant shutdown

# approach is that mod_ssl sends the close notify alert but doesn't wait for

# the close notify alert from client. When you need a different shutdown

# approach you can use one of the following variables:

# o ssl-unclean-shutdown:

# This forces an unclean shutdown when the connection is closed, i.e. no

# SSL close notify alert is sent or allowed to be received. This violates

# the SSL/TLS standard but is needed for some brain-dead browsers. Use

# this when you receive I/O errors because of the standard approach where

# mod_ssl sends the close notify alert.

# o ssl-accurate-shutdown:

# This forces an accurate shutdown when the connection is closed, i.e. a

# SSL close notify alert is send and mod_ssl waits for the close notify

# alert of the client. This is 100% SSL/TLS standard compliant, but in

# practice often causes hanging connections with brain-dead browsers. Use

# this only for browsers where you know that their SSL implementation

# works correctly.

# Notice: Most problems of broken clients are also related to the HTTP

# keep-alive facility, so you usually additionally want to disable

# keep-alive for those clients, too. Use variable "nokeepalive" for this.

# Similarly, one has to force some clients to use HTTP/1.0 to workaround

# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and

# "force-response-1.0" for this.

BrowserMatch "MSIE [2-5]" \

nokeepalive ssl-unclean-shutdown \

downgrade-1.0 force-response-1.0

# Per-Server Logging:

# The home of a custom SSL log file. Use this when you want a

# compact non-error SSL logfile on a virtual host basis.

CustomLog "C:/xampp/apache/logs/ssl_request.log" \

"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"

</VirtualHost>

responde no mp

Link para o post
Compartilhar em outros sites
  • 2 weeks later...
  • 2 weeks later...
Eai mlk segue os passo abaixo 
 
Vai em Firewall do Windows
 
Dps Vai Em Regras de Entrada: Nome da Porta, OT Site: 8090 TCP
Dps Vai Em Regras de Entrada: Nome da Porta, OT Site: 4499 TCP
 
 
Vai Em Regras de Saída: Nome da Porta, OT Site: 8090 TCP
Vai Em Regras de Saída: Nome da Porta, OT Site: 4499 TCP
 
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Agr vai no Moden 
 
Nome da Porta: OT Site 8090 TCP
Nome da Porta:OT Site 4499 TCP
 
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Dps Vai Em httpd.config
 
#Listen seuipaqui.servegame.com:8090 <<--- Aqui vc colocar o ip do seu no-ip
#Listen [::]:8090
Listen 8090
 
 
ServerName localhost:8090
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
 
Dps Vai Em httpd-ssl.config
 
 Listen directives: "Listen [::]:4499" and "Listen 0.0.0.0:4499" <<--- Aqui vc colocar o ip do seu no-ip
#
#Listen 0.0.0.0:4499 <<--- Aqui vc colocar o ip do seu no-ip
#Listen [::]:4499
Listen 4499
 
<VirtualHost _default_:4499>
    #   General setup for the virtual host
    DocumentRoot "C:/xampp/htdocs"
    ServerName localhost:4499
 
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
 
 
Espero ter ajudado manin  
 
Se quiser conferir acesse meu site : http://solera-global.servegame.com
 
Ah lembrando o meu ip é assim pq tirei a porta 8090 se quiser pois eu ensino
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
Link para o post
Compartilhar em outros sites

Participe da conversa

Você pode postar agora e se cadastrar mais tarde. Se você tem uma conta, faça o login para postar com sua conta.

Visitante
Responder

×   Você colou conteúdo com formatação.   Remover formatação

  Apenas 75 emojis são permitidos.

×   Seu link foi automaticamente incorporado.   Mostrar como link

×   Seu conteúdo anterior foi restaurado.   Limpar o editor

×   Não é possível colar imagens diretamente. Carregar ou inserir imagens do URL.

  • Quem Está Navegando   0 membros estão online

    Nenhum usuário registrado visualizando esta página.


  • Conteúdo Similar

    • Por Jaurez
      .
    • Por Cat
      Em alguns casos, o tibia 8.60 comum não abre de jeito nenhum no map editor, mesmo desmarcando check file signatures e configurando o path corretamente.
       
      Este é o client 8.60 adaptado para o Remere's Map Editor. Resolvi postar já que ele foi removido do site oficial do RME. (ficou apenas a versão para linux lá)
      Se estiver tendo problemas para abrir a versão 8.60, tente utilizar este.
                                                                                                                     
      Baixar o Tibia Client 8.60 que funciona no Remere’s Map Editor
      Essa versão do Tibia 8.60 client resolve o erro unsupported client version ou Could not locate tibia.dat and/or tibia.spr, please navigate to your tibia 8.60 installation folder.
       
      Downloads
      https://tibiaking.com/applications/core/interface/file/attachment.php?id=47333

      Scan: https://www.virustotal.com/gui/file/333e172ac49ba2028db9eb5889994509e7d2de28ebccfa428c04e86defbe15cc
       
    • Por danilo belato
      Fala Galera To Com um problema aki 
       
      quero exporta umas sprites de um server para colocar em outro 
       
      eu clico na sprites ai aparece tds a forma delas do lado de la >>
       
      ai eu clico nela e ponho a opiçao de export mais quando salvo a sprite ela n abri 
       
      aparece isso quando tento vê-la 
       
      visualização não disponível ( no formatos png e bitmap)
       
      Agora no formato idc fala que o paint n pode ler 
       
      me ajudem ae...
    • Por Vitor Bicaleto
      Galera to com o script do addon doll aqui, quando eu digito apenas "!addon" ele aparece assim: Digite novamente, algo está errado!"
      quando digito por exemplo: "!addon citizen" ele não funciona e não da nenhum erro
       
      mesma coisa acontece com o mount doll.. 
    • Por Ayron5
      Substitui uma stone no serve, deu tudo certo fora  esse  erro ajudem  Valendo  Rep+  Grato  

      Erro: data/actions/scripts/boost.lua:557: table index is nil
       [Warning - Event::loadScript] Cannot load script (data/actions/scripts/boost.lua)

      Script:
×
×
  • Criar Novo...

Informação Importante

Confirmação de Termo