Normal [Alguem me ajuda]Erro em configurar o apache do xamp

[kassiosilva 2]

Alguem podeira me ajudar com o xamp?
tipo nao consigo deixar o site online pra outras pessoas
nao sei como deve fazer la na configuraçao dos arquivos  httpd  e httpd-ssl
do apache
aki o site abre normal apenas nao consigo deixa ele online pra outras pessoas criarem account
agradeço

segue os arquivos   httpd e httpd-ssl

 

Arquivo httpd

#

# This is the main Apache HTTP server configuration file.  It contains the

# configuration directives that give the server its instructions.

# See <URL:http://httpd.apache.org/docs/2.2>for detailed information.

# In particular, see 

# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>

# for a discussion of each configuration directive.

#

# Do NOT simply read the instructions in here without understanding

# what they do.  They're here only as hints or reminders.  If you are unsure

# consult the online docs. You have been warned.  

#

# Configuration and logfile names: If the filenames you specify for many

# of the server's control files begin with "/" (or "drive:/" for Win32), the

# server will use that explicit path.  If the filenames do *not* begin

# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"

# with ServerRoot set to "/xampp/apache" will be interpreted by the

# server as "/xampp/apache/logs/foo.log".

#

# NOTE: Where filenames are specified, you must use forward slashes

# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").

# If a drive letter is omitted, the drive on which httpd.exe is located

# will be used by default.  It is recommended that you always supply

# an explicit drive letter in absolute paths to avoid confusion.

 

#

# ServerRoot: The top of the directory tree under which the server's

# configuration, error, and log files are kept.

#

# Do not add a slash at the end of the directory path.  If you point

# ServerRoot at a non-local disk, be sure to point the LockFile directive

# at a local disk.  If you wish to share the same ServerRoot for multiple

# httpd daemons, you will need to change at least LockFile and PidFile.

#

ServerRoot "/xampp/apache"

 

#

# Listen: Allows you to bind Apache to specific IP addresses and/or

# ports, instead of the default. See also the <VirtualHost>

# directive.

#

# Change this to Listen on specific IP addresses as shown below to 

# prevent Apache from glomming onto all bound IP addresses.

#

#Listen 0.0.0.0:80

#Listen [::]:80

Listen 8090

 

#

# Dynamic Shared Object (DSO) Support

#

# To be able to use the functionality of a module which was built as a DSO you

# have to place corresponding `LoadModule' lines at this location so the

# directives contained in it are actually available _before_ they are used.

# Statically compiled modules (those listed by `httpd -l') do not need

# to be loaded here.

#

# Example:

# LoadModule foo_module modules/mod_foo.so

#

LoadModule actions_module modules/mod_actions.so

LoadModule alias_module modules/mod_alias.so

LoadModule asis_module modules/mod_asis.so

LoadModule auth_basic_module modules/mod_auth_basic.so

LoadModule auth_digest_module modules/mod_auth_digest.so

#LoadModule authn_alias_module modules/mod_authn_alias.so

#LoadModule authn_anon_module modules/mod_authn_anon.so

#LoadModule authn_dbd_module modules/mod_authn_dbd.so

#LoadModule authn_dbm_module modules/mod_authn_dbm.so

LoadModule authn_default_module modules/mod_authn_default.so

LoadModule authn_file_module modules/mod_authn_file.so

#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so

#LoadModule authz_dbm_module modules/mod_authz_dbm.so

LoadModule authz_default_module modules/mod_authz_default.so

LoadModule authz_groupfile_module modules/mod_authz_groupfile.so

LoadModule authz_host_module modules/mod_authz_host.so

#LoadModule authz_owner_module modules/mod_authz_owner.so

LoadModule authz_user_module modules/mod_authz_user.so

##LoadModule autoindex_module modules/mod_autoindex.so # replaced with autoindex_color_module

#LoadModule bucketeer_module modules/mod_bucketeer.so

#LoadModule cache_module modules/mod_cache.so

#LoadModule case_filter_module modules/mod_case_filter.so

#LoadModule case_filter_in_module modules/mod_case_filter_in.so

#LoadModule cern_meta_module modules/mod_cern_meta.so

LoadModule cgi_module modules/mod_cgi.so

#LoadModule charset_lite_module modules/mod_charset_lite.so

LoadModule dav_module modules/mod_dav.so

LoadModule dav_fs_module modules/mod_dav_fs.so

LoadModule dav_lock_module modules/mod_dav_lock.so

#LoadModule dbd_module modules/mod_dbd.so

#LoadModule deflate_module modules/mod_deflate.so

LoadModule dir_module modules/mod_dir.so

#LoadModule disk_cache_module modules/mod_disk_cache.so

#LoadModule dumpio_module modules/mod_dumpio.so

#LoadModule echo_module modules/mod_echo.so

LoadModule env_module modules/mod_env.so

#LoadModule example_module modules/mod_example.so

#LoadModule expires_module modules/mod_expires.so

#LoadModule ext_filter_module modules/mod_ext_filter.so

#LoadModule file_cache_module modules/mod_file_cache.so

#LoadModule filter_module modules/mod_filter.so

LoadModule headers_module modules/mod_headers.so

#LoadModule ident_module modules/mod_ident.so

#LoadModule imagemap_module modules/mod_imagemap.so

LoadModule include_module modules/mod_include.so

LoadModule info_module modules/mod_info.so

LoadModule isapi_module modules/mod_isapi.so

#LoadModule ldap_module modules/mod_ldap.so

#LoadModule logio_module modules/mod_logio.so

LoadModule log_config_module modules/mod_log_config.so

#LoadModule log_forensic_module modules/mod_log_forensic.so

#LoadModule mem_cache_module modules/mod_mem_cache.so

LoadModule mime_module modules/mod_mime.so

#LoadModule mime_magic_module modules/mod_mime_magic.so

LoadModule negotiation_module modules/mod_negotiation.so

#LoadModule proxy_module modules/mod_proxy.so

#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so

#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so

#LoadModule proxy_connect_module modules/mod_proxy_connect.so

#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so

#LoadModule proxy_http_module modules/mod_proxy_http.so

LoadModule rewrite_module modules/mod_rewrite.so

LoadModule setenvif_module modules/mod_setenvif.so

#LoadModule speling_module modules/mod_speling.so

LoadModule ssl_module modules/mod_ssl.so

LoadModule status_module modules/mod_status.so

#LoadModule substitute_module modules/mod_substitute.so

#LoadModule unique_id_module modules/mod_unique_id.so

#LoadModule userdir_module modules/mod_userdir.so

#LoadModule usertrack_module modules/mod_usertrack.so

#LoadModule version_module modules/mod_version.so

#LoadModule vhost_alias_module modules/mod_vhost_alias.so

 

#

# 3rd party modules

#

LoadModule autoindex_color_module modules/mod_autoindex_color.so

 

<IfModule !mpm_netware_module>

<IfModule !mpm_winnt_module>

#

# If you wish httpd to run as a different user or group, you must run

# httpd as root initially and it will switch.  

#

# User/Group: The name (or #number) of the user/group to run httpd as.

# It is usually good practice to create a dedicated user and group for

# running httpd, as with most system services.

#

User daemon

Group daemon

 

</IfModule>

</IfModule>

 

# 'Main' server configuration

#

# The directives in this section set up the values used by the 'main'

# server, which responds to any requests that aren't handled by a

# <VirtualHost> definition.  These values also provide defaults for

# any <VirtualHost> containers you may define later in the file.

#

# All of these directives may appear inside <VirtualHost> containers,

# in which case these default settings will be overridden for the

# virtual host being defined.

#

 

#

# ServerAdmin: Your address, where problems with the server should be

# e-mailed.  This address appears on some server-generated pages, such

# as error documents.  e.g. [email protected]

#

ServerAdmin postmaster@localhost

 

#

# ServerName gives the name and port that the server uses to identify itself.

# This can often be determined automatically, but we recommend you specify

# it explicitly to prevent problems during startup.

#

# If your host doesn't have a registered DNS name, enter its IP address here.

#

ServerName pokex.servegame.com:8090

 

#

# DocumentRoot: The directory out of which you will serve your

# documents. By default, all requests are taken from this directory, but

# symbolic links and aliases may be used to point to other locations.

#

DocumentRoot "/xampp/htdocs"

 

#

# Each directory to which Apache has access can be configured with respect

# to which services and features are allowed and/or disabled in that

# directory (and its subdirectories). 

#

# First, we configure the "default" to be a very restrictive set of 

# features.  

#

<Directory />

    Options FollowSymLinks

    AllowOverride None

    Order deny,allow

    Deny from all

</Directory>

 

#

# Note that from this point forward you must specifically allow

# particular features to be enabled - so if something's not working as

# you might expect, make sure that you have specifically enabled it

# below.

#

 

#

# This should be changed to whatever you set DocumentRoot to.

#

<Directory "/xampp/htdocs">

    #

    # Possible values for the Options directive are "None", "All",

    # or any combination of:

    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews

    #

    # Note that "MultiViews" must be named *explicitly* --- "Options All"

    # doesn't give it to you.

    #

    # The Options directive is both complicated and important.  Please see

    # http://httpd.apache.org/docs/2.2/mod/core.html#options

    # for more information.

    #

    Options Indexes FollowSymLinks Includes ExecCGI

 

    #

    # AllowOverride controls what directives may be placed in .htaccess files.

    # It can be "All", "None", or any combination of the keywords:

    #   Options FileInfo AuthConfig Limit

    #

    AllowOverride All

 

    #

    # Controls who can get stuff from this server.

    #

    Order allow,deny

    Allow from all

 

</Directory>

 

#

# DirectoryIndex: sets the file that Apache will serve if a directory

# is requested.

#

<IfModule dir_module>

    DirectoryIndex index.php index.pl index.cgi index.asp index.shtml index.html index.htm \

                   default.php default.pl default.cgi default.asp default.shtml default.html default.htm \

                   home.php home.pl home.cgi home.asp home.shtml home.html home.htm

</IfModule>

 

#

# The following lines prevent .htaccess and .htpasswd files from being 

# viewed by Web clients. 

#

<FilesMatch "^\.ht">

    Order allow,deny

    Deny from all

    Satisfy All

</FilesMatch>

 

#

# ErrorLog: The location of the error log file.

# If you do not specify an ErrorLog directive within a <VirtualHost>

# container, error messages relating to that virtual host will be

# logged here.  If you *do* define an error logfile for a <VirtualHost>

# container, that host's errors will be logged there and not here.

#

ErrorLog "logs/error.log"

 

#ScriptLog "logs/cgi.log"

 

#

# LogLevel: Control the number of messages logged to the error_log.

# Possible values include: debug, info, notice, warn, error, crit,

# alert, emerg.

#

LogLevel warn

 

<IfModule log_config_module>

    #

    # The following directives define some format nicknames for use with

    # a CustomLog directive (see below).

    #

    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined

    LogFormat "%h %l %u %t \"%r\" %>s %b" common

 

    <IfModule logio_module>

      # You need to enable mod_logio.c to use %I and %O

      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio

    </IfModule>

 

    #

    # The location and format of the access logfile (Common Logfile Format).

    # If you do not define any access logfiles within a <VirtualHost>

    # container, they will be logged here.  Contrariwise, if you *do*

    # define per-<VirtualHost> access logfiles, transactions will be

    # logged therein and *not* in this file.

    #

    #CustomLog "logs/access.log" common

 

    #

    # If you prefer a logfile with access, agent, and referer information

    # (Combined Logfile Format) you can use the following directive.

    #

    CustomLog "logs/access.log" combined

</IfModule>

 

<IfModule alias_module>

    #

    # Redirect: Allows you to tell clients about documents that used to 

    # exist in your server's namespace, but do not anymore. The client 

    # will make a new request for the document at its new location.

    # Example:

    # Redirect permanent /foo http://localhost/bar

 

    #

    # Alias: Maps web paths into filesystem paths and is used to

    # access content that does not live under the DocumentRoot.

    # Example:

    # Alias /webpath /full/filesystem/path

    #

    # If you include a trailing / on /webpath then the server will

    # require it to be present in the URL.  You will also likely

    # need to provide a <Directory> section to allow access to

    # the filesystem path.

 

    #

    # ScriptAlias: This controls which directories contain server scripts. 

    # ScriptAliases are essentially the same as Aliases, except that

    # documents in the target directory are treated as applications and

    # run by the server when requested rather than as documents sent to the

    # client.  The same rules about trailing "/" apply to ScriptAlias

    # directives as to Alias.

    #

    ScriptAlias /cgi-bin/ "/xampp/cgi-bin/"

 

</IfModule>

 

<IfModule cgid_module>

    #

    # ScriptSock: On threaded servers, designate the path to the UNIX

    # socket used to communicate with the CGI daemon of mod_cgid.

    #

    #Scriptsock "logs/cgi.sock"

</IfModule>

 

#

# "/xampp/cgi-bin" should be changed to whatever your ScriptAliased

# CGI directory exists, if you have that configured.

#

<Directory "/xampp/cgi-bin">

    AllowOverride None

    Options None

    Order allow,deny

    Allow from all

</Directory>

 

#

# DefaultType: the default MIME type the server will use for a document

# if it cannot otherwise determine one, such as from filename extensions.

# If your server contains mostly text or HTML documents, "text/plain" is

# a good value.  If most of your content is binary, such as applications

# or images, you may want to use "application/octet-stream" instead to

# keep browsers from trying to display binary files as though they are

# text.

#

DefaultType text/plain

 

<IfModule mime_module>

    #

    # TypesConfig points to the file containing the list of mappings from

    # filename extension to MIME-type.

    #

    TypesConfig "conf/mime.types"

 

    #

    # AddType allows you to add to or override the MIME configuration

    # file specified in TypesConfig for specific file types.

    #

    #AddType application/x-gzip .tgz

    #

    # AddEncoding allows you to have certain browsers uncompress

    # information on the fly. Note: Not all browsers support this.

    #

    #AddEncoding x-compress .Z

    #AddEncoding x-gzip .gz .tgz

    #

    # If the AddEncoding directives above are commented-out, then you

    # probably should define those extensions to indicate media types:

    #

    AddType application/x-compress .Z

    AddType application/x-gzip .gz .tgz

 

    #

    # AddHandler allows you to map certain file extensions to "handlers":

    # actions unrelated to filetype. These can be either built into the server

    # or added with the Action directive (see below)

    #

    # To use CGI scripts outside of ScriptAliased directories:

    # (You will also need to add "ExecCGI" to the "Options" directive.)

    #

    AddHandler cgi-script .cgi .pl .asp

 

    # For type maps (negotiated resources):

    #AddHandler type-map var

 

    #

    # Filters allow you to process content before it is sent to the client.

    #

    # To parse .shtml files for server-side includes (SSI):

    # (You will also need to add "Includes" to the "Options" directive.)

    #

    AddType text/html .shtml

    AddOutputFilter INCLUDES .shtml

</IfModule>

 

<IfModule mime_magic_module>

    #

    # The mod_mime_magic module allows the server to use various hints from the

    # contents of the file itself to determine its type.  The MIMEMagicFile

    # directive tells the module where the hint definitions are located.

    #

    MIMEMagicFile "conf/magic"

</IfModule>

 

#

# Customizable error responses come in three flavors:

# 1) plain text 2) local redirects 3) external redirects

#

# Some examples:

#ErrorDocument 500 "The server made a boo boo."

#ErrorDocument 404 /missing.html

#ErrorDocument 404 "/cgi-bin/missing_handler.pl"

#ErrorDocument 402 http://localhost/subscription_info.html

#

 

#

# EnableMMAP and EnableSendfile: On systems that support it, 

# memory-mapping or the sendfile syscall is used to deliver

# files.  This usually improves server performance, but must

# be turned off when serving from networked-mounted 

# filesystems or if support for these functions is otherwise

# broken on your system.

#

#EnableMMAP off

#EnableSendfile off

 

# Supplemental configuration

#

# The configuration files in the conf/extra/ directory can be 

# included to add extra features or to modify the default configuration of 

# the server, or you may simply copy their contents here and change as 

# necessary.

 

# XAMPP specific settings

Include "conf/extra/httpd-xampp.conf"

 

# Perl settings

Include "conf/extra/perl.conf"

 

# Server-pool management (MPM specific)

Include "conf/extra/httpd-mpm.conf"

 

# Multi-language error messages

Include "conf/extra/httpd-multilang-errordoc.conf"

 

# Fancy directory listings

Include "conf/extra/httpd-autoindex.conf"

 

# Language settings

Include "conf/extra/httpd-languages.conf"

 

# User home directories

Include "conf/extra/httpd-userdir.conf"

 

# Real-time info on requests and configuration

Include "conf/extra/httpd-info.conf"

 

# Virtual hosts

Include "conf/extra/httpd-vhosts.conf"

 

# Distributed authoring and versioning (WebDAV)

Include "conf/extra/httpd-dav.conf"

 

# Implements a proxy/gateway for Apache.

Include "conf/extra/httpd-proxy.conf"

 

# Various default settings

Include "conf/extra/httpd-default.conf"

 

# Secure (SSL/TLS) connections

Include "conf/extra/httpd-ssl.conf"

#

# Note: The following must must be present to support

#       starting without SSL on platforms with no /dev/random equivalent

#       but a statically compiled-in mod_ssl.

#

<IfModule ssl_module>

    SSLRandomSeed startup builtin

    SSLRandomSeed connect builtin

    SSLSessionCache "shmcb:logs/ssl.scache(512000)"

    SSLSessionCacheTimeout 300

</IfModule>

 

 

Arquivo httpd-ssl

#

#

# This is the Apache server configuration file providing SSL support.

# It contains the configuration directives to instruct the server how to

# serve pages over an https connection. For detailing information about these 

# directives see <URL:http://httpd.apache.org/docs/2.2/mod/mod_ssl.html>

# 

# Do NOT simply read the instructions in here without understanding

# what they do.  They're here only as hints or reminders.  If you are unsure

# consult the online docs. You have been warned.  

#

 

<IfModule ssl_module>

 

#

# Pseudo Random Number Generator (PRNG):

# Configure one or more sources to seed the PRNG of the SSL library.

# The seed data should be of good random quality.

# WARNING! On some platforms /dev/random blocks if not enough entropy

# is available. This means you then cannot use the /dev/random device

# because it would lead to very long connection times (as long as

# it requires to make more entropy available). But usually those

# platforms additionally provide a /dev/urandom device which doesn't

# block. So, if available, use this one instead. Read the mod_ssl User

# Manual for more details.

#

#SSLRandomSeed startup file:/dev/random  512

#SSLRandomSeed startup file:/dev/urandom 512

#SSLRandomSeed connect file:/dev/random  512

#SSLRandomSeed connect file:/dev/urandom 512

 

 

#

# When we also provide SSL we have to listen to the 

# standard HTTP port (see above) and to the HTTPS port

#

# Note: Configurations that use IPv6 but not IPv4-mapped addresses need two

#       Listen directives: "Listen [::]:4499" and "Listen 0.0.0.0:4499"

#

#Listen 0.0.0.0:4499

#Listen [::]:4499

Listen 4499

 

##

##  SSL Global Context

##

##  All SSL configuration in this context applies both to

##  the main server and all SSL-enabled virtual hosts.

##

 

<IfModule mime_module>

    #

    #   Some MIME-types for downloading Certificates and CRLs

    #

    AddType application/x-x509-ca-cert .crt

    AddType application/x-pkcs7-crl    .crl

</IfModule>

 

#   Pass Phrase Dialog:

#   Configure the pass phrase gathering process.

#   The filtering dialog program (`builtin' is a internal

#   terminal dialog) has to provide the pass phrase on stdout.

SSLPassPhraseDialog  builtin

 

#   Inter-Process Session Cache:

#   Configure the SSL Session Cache: First the mechanism 

#   to use and second the expiring timeout (in seconds).

#SSLSessionCache         "dbm:logs/ssl.scache"

##SSLSessionCache        "shmcb:logs/ssl.scache(512000)"

##SSLSessionCacheTimeout  300

 

#   Semaphore:

#   Configure the path to the mutual exclusion semaphore the

#   SSL engine uses internally for inter-process synchronization. 

SSLMutex default

 

##

## SSL Virtual Host Context

##

 

<VirtualHost _default_:4499>

    #   General setup for the virtual host

    DocumentRoot "/xampp/htdocs"

    ServerName "pokex.servegame.com:4499"

    ServerAdmin webmaster@localhost

    ErrorLog "logs/error.log"

    <IfModule log_config_module>

        CustomLog "logs/access.log" combined

    </IfModule>

    

    #   SSL Engine Switch:

    #   Enable/Disable SSL for this virtual host.

    SSLEngine on

    

    #   SSL Cipher Suite:

    #   List the ciphers that the client is permitted to negotiate.

    #   See the mod_ssl documentation for a complete list.

    SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL

    

    #   Server Certificate:

    #   Point SSLCertificateFile at a PEM encoded certificate.  If

    #   the certificate is encrypted, then you will be prompted for a

    #   pass phrase.  Note that a kill -HUP will prompt again.  Keep

    #   in mind that if you have both an RSA and a DSA certificate you

    #   can configure both in parallel (to also allow the use of DSA

    #   ciphers, etc.)

    #SSLCertificateFile "conf/ssl.crt/server-dsa.crt"

    SSLCertificateFile "conf/ssl.crt/server.crt"

    

    #   Server Private Key:

    #   If the key is not combined with the certificate, use this

    #   directive to point at the key file.  Keep in mind that if

    #   you've both a RSA and a DSA private key you can configure

    #   both in parallel (to also allow the use of DSA ciphers, etc.)

    #SSLCertificateKeyFile "conf/ssl.key/server-dsa.key"

    SSLCertificateKeyFile "conf/ssl.key/server.key"

    

    #   Server Certificate Chain:

    #   Point SSLCertificateChainFile at a file containing the

    #   concatenation of PEM encoded CA certificates which form the

    #   certificate chain for the server certificate. Alternatively

    #   the referenced file can be the same as SSLCertificateFile

    #   when the CA certificates are directly appended to the server

    #   certificate for convinience.

    #SSLCertificateChainFile "conf/ssl.crt/server-ca.crt"

    

    #   Certificate Authority (CA):

    #   Set the CA certificate verification path where to find CA

    #   certificates for client authentication or alternatively one

    #   huge file containing all of them (file must be PEM encoded)

    #   Note: Inside SSLCACertificatePath you need hash symlinks

    #         to point to the certificate files. Use the provided

    #         Makefile to update the hash symlinks after changes.

    #SSLCACertificatePath "conf/ssl.crt"

    #SSLCACertificateFile "conf/ssl.crt/ca-bundle.crt"

    

    #   Certificate Revocation Lists (CRL):

    #   Set the CA revocation path where to find CA CRLs for client

    #   authentication or alternatively one huge file containing all

    #   of them (file must be PEM encoded)

    #   Note: Inside SSLCARevocationPath you need hash symlinks

    #         to point to the certificate files. Use the provided

    #         Makefile to update the hash symlinks after changes.

    #SSLCARevocationPath "conf/ssl.crl"

    #SSLCARevocationFile "conf/ssl.crl/ca-bundle.crl"

    

    #   Client Authentication (Type):

    #   Client certificate verification type and depth.  Types are

    #   none, optional, require and optional_no_ca.  Depth is a

    #   number which specifies how deeply to verify the certificate

    #   issuer chain before deciding the certificate is not valid.

    #SSLVerifyClient require

    #SSLVerifyDepth  10

    

    #   Access Control:

    #   With SSLRequire you can do per-directory access control based

    #   on arbitrary complex boolean expressions containing server

    #   variable checks and other lookup directives.  The syntax is a

    #   mixture between C and Perl.  See the mod_ssl documentation

    #   for more details.

    #<Location />

    #SSLRequire (    %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \

    #            and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \

    #            and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \

    #            and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \

    #            and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20       ) \

    #           or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/

    #</Location>

    

    #   SSL Engine Options:

    #   Set various options for the SSL engine.

    #   o FakeBasicAuth:

    #     Translate the client X.509 into a Basic Authorisation.  This means that

    #     the standard Auth/DBMAuth methods can be used for access control.  The

    #     user name is the `one line' version of the client's X.509 certificate.

    #     Note that no password is obtained from the user. Every entry in the user

    #     file needs this password: `xxj31ZMTZzkVA'.

    #   o ExportCertData:

    #     This exports two additional environment variables: SSL_CLIENT_CERT and

    #     SSL_SERVER_CERT. These contain the PEM-encoded certificates of the

    #     server (always existing) and the client (only existing when client

    #     authentication is used). This can be used to import the certificates

    #     into CGI scripts.

    #   o StdEnvVars:

    #     This exports the standard SSL/TLS related `SSL_*' environment variables.

    #     Per default this exportation is switched off for performance reasons,

    #     because the extraction step is an expensive operation and is usually

    #     useless for serving static content. So one usually enables the

    #     exportation for CGI and SSI requests only.

    #   o StrictRequire:

    #     This denies access when "SSLRequireSSL" or "SSLRequire" applied even

    #     under a "Satisfy any" situation, i.e. when it applies access is denied

    #     and no other module can change it.

    #   o OptRenegotiate:

    #     This enables optimized SSL connection renegotiation handling when SSL

    #     directives are used in per-directory context. 

    #SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire

    <FilesMatch "\.(cgi|shtml|pl|asp|php)$">

        SSLOptions +StdEnvVars

    </FilesMatch>

    <Directory "/xampp/cgi-bin">

        SSLOptions +StdEnvVars

    </Directory>

    

    #   SSL Protocol Adjustments:

    #   The safe and default but still SSL/TLS standard compliant shutdown

    #   approach is that mod_ssl sends the close notify alert but doesn't wait for

    #   the close notify alert from client. When you need a different shutdown

    #   approach you can use one of the following variables:

    #   o ssl-unclean-shutdown:

    #     This forces an unclean shutdown when the connection is closed, i.e. no

    #     SSL close notify alert is send or allowed to received.  This violates

    #     the SSL/TLS standard but is needed for some brain-dead browsers. Use

    #     this when you receive I/O errors because of the standard approach where

    #     mod_ssl sends the close notify alert.

    #   o ssl-accurate-shutdown:

    #     This forces an accurate shutdown when the connection is closed, i.e. a

    #     SSL close notify alert is send and mod_ssl waits for the close notify

    #     alert of the client. This is 100% SSL/TLS standard compliant, but in

    #     practice often causes hanging connections with brain-dead browsers. Use

    #     this only for browsers where you know that their SSL implementation

    #     works correctly. 

    #   Notice: Most problems of broken clients are also related to the HTTP

    #   keep-alive facility, so you usually additionally want to disable

    #   keep-alive for those clients, too. Use variable "nokeepalive" for this.

    #   Similarly, one has to force some clients to use HTTP/1.0 to workaround

    #   their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and

    #   "force-response-1.0" for this.

    BrowserMatch ".*MSIE.*" nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0

    

    #   Per-Server Logging:

    #   The home of a custom SSL log file. Use this when you want a

    #   compact non-error SSL logfile on a virtual host basis.

    CustomLog "logs/ssl_request.log" "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"

</VirtualHost>                                  

 

</IfModule>